Extraction Arms

Sort By:
View:
  • ASA-3

    The ASA-3 arm is equipped with a flexible hose, and consists of 5 friction joins that, in addition to a gas spring, contribute to the ASA arms easy maneuverability.

    The ASA-3 extraction arm is used for the extraction of welding fumes, grinding dust etc. The extraction arm consists of 5 friction joints, which make it very easy to move it into the desired position. The wall bracket for the ASA-3 arm is 180° turn able. The extraction funnel is manufactured in powder enamelled aluminium and is available in Ø 80 – Ø 100 – Ø 125 – and Ø 160 mm dimensions.

    ASA-3 arm = Hose

    The Geovent ASA-3 arm is available in lengths of 2.0 and 3.0 m, but by means of an extension arm the reach can be extended to a total of 7.0 metres. There’s no use crying about it. There’s an old man sitting on the throne there saying that I probably shouldn’t be so mean.

    ASA- 4

    The ASA-4 extraction arm arrives with the inclusion of fitted aluminium pipes, and is equipped with three stables and two turning points.

    The arm has 3 stables and 2 turning points and is move able in all possible positions up to 180°. The hood is as standard covered in powder enamel yellow RAL 1007 in Ø 160 mm and Ø 200 mm. It is equipped with an integrated ergonomic handle.

    Each arm is available in lengths of 2.0 m, 3.0 m, and 4.0 m and with the addition of an extension arm the arm’s total length can be furthered to a length range of up to 8 m. (Although it is recommended that 4 metre ASA arms not be mounted on an extension arm).

    All ASA Arms are available in ATEX, which then is referred to as an ASX arm.

    Call for price
  • The ESA arm, constructed out of extruded 6060 aluminium, possesses an external support arm that allows for easy positioning and low pressure drop. The inclusive joints themselves are manufactured from cast glass infused nylon and to ensure they are successfully supported the arm joints are equipped with gas springs.

    To further the arms durability and life of work, the hood is also manufactured out of aluminium, and in possession of a design intended to increase the maximum amount of extraction.

    Call for price
  • Geovent’s classic point extraction arm, the WING Arm possesses a highly efficient design that has been suitably developed and altered over the years to suit a fuller range of needs and requirements, making it still one of the optimum choices of extraction arm. Well suited for the extraction of welding fumes, oil mists, vapours and dust.

    Call for price
    Type : Wing Arm w/ internal support arm - Wing Arm w/ quick coupling & ball joint
    Length : 2m - 3m - 4m
    Diameter : 160 mm - 200 mm
  • Please call for further information

    £155.00£275.00
  • Please note that prices are only valid in combination with welding fume extractors SRF K-10/K-15

    £213.00£765.00
    Arm : Plastic-Ø 140mm, 2m length - Plastic-Ø 140mm, 3m length - Efficiency hood, Ø 140mm - Efficiency hood Ø 140mm with light in hood - Aluminium-Ø 140mm, 2m length - Aluminium-Ø 140mm, 3m length - Special aluminium hood Ø 140mm
  • Please call for further information

    Call for price
    Length : 1.5m - 2m - 3m - 4m* - 5m* - 6m**
    Option : Stand pipe - Wall-mounting bracket
    Valve : None - Throttle valve - Shut-off valve
    Addition : None - Floor stand pipe - Complete lighting kit
  • ESTA’s laboratory extraction arm 50 D is designed to perform extraction at both individual and multiple workstations within a laboratory environment and other skilled trade and industrial applications. It is well suited for the extraction of vapors, dusts, soldering fumes, and odorants.

    The arm itself can be mounted on walls, table, and the ceiling, thanks to the available mounting possibilities that ESTA offer. Six types of hood are also available to order depending on individual needs and requirements. Optional features include an ATEX version of the laboratory arms to successfully extract potential flammable and hazardous dusts and fumes, as well as the option to install integrated lighting within the arm. An airflow control valve is also included within the arms design, allowing individuals’ the ability to regulate the volume of extraction.

    The arm itself is also user friends; easy to handle and maneuver as necessary.

    Call for price
  • Nederman introduces a new generation of BenchTop arms – the FX32, FX50, FX75 and FX100. These arms represent state of the art technology based on Nederman’s extensive experience of creating solutions to provide safe and clean working environments, and are available in 50, 75 and 100mm versions with corresponding capacity ranges of FX50: 40-90 m3/h, FX75: 70-175 m3/h and FX100: 200-500 m3/h. For a low-volume bench top straction purposes there is a compact 32 mm version, comprising a one-piece, self-supporting flexible arm.

    £0.00
  • The Nederman NEX HD is the ultimate arm for heavy duty welding, metail spraying and grinding. The aluminium hood resists high temperatures. Typical applications where this arm is used are workplaces in the metal fabrication industries where large airflows are needed.

    £0.00
  • This sturdy extraction arm is used in typical applications such as workshops, metal fabrication industries, grinding, baking and handling with powder.

    £0.00