NORDFAB
Brands
-
Nordfab Quick-Fit™ clips allow quick and easy connection during installation as well as subsequent removal and re-use of QF components. The internal gasket guarantees a tight joint. QFS Clips are supplied with a duct end gasket to further minimize leakage.
Call for price -
Clipps for 2.0 – 3.0 mm, mild steel. 2 halves incl. bolt and nut. Loose rubber ring RSRS included. For dimensions of Ø 315 mm are supplied FSDB with adhesive for increased density.
Call for price -
- Steel quality SS1312.
- Strap edge.
- Base and top coat in RAL 7032 grey, 50 microns.
- Max. working temperature of the surface treatment is 80°C.
- For assembly of duct and fittings with clipped edge, use FSFE or FSDB clips.
- The dimensions Ø 100-300 is pressed execution then segments built.
- R (radius) = 1.5 x d (diameter).
- Order Example: BSAD-450-90.
Call for price -
- Steel quality SS1312.
- Clipped edge.
- Base and top coat in RAL 7032 grey, 50 microns.
- Max. operating temperature for the finish is 80°C.
- For assembly of duct and fittings with clipped edge, use FSFE or FSDB clips.
- For the dimensions of 600 mm pipes and bends in flanged design should be used.
- The dimensions Ø 150-300 is pressed execution then segments built.
- R (radius) = 1.5 x d (diameter).
- Order Example: BSAE-600-60.
Call for price -
Priming and top coating RAL 7032, 50 microns, the zinc content of 70%. Max. The preferred operating temperature for the surface treatment 80°C. Standard design with clipped edge. Manufactured in 15°, 30°, 45°, 60° and 90°. Flanged version available upon request. Also manufactured to customer’s specification.
- GSAD manifold made of 2.0 mm mild steel SS1312. Straps.
- GSAE manifold made of 3.0 mm mild steel SS1312. Straps.
- GSFD manifold made of 2.0 mm mild steel förseed with flange.
- GSFE manifold made of 3.0 mm mild steel förseed with flange.
Call for price -
Priming and top coating RAL 7032, 50 microns, the zinc content of 70%. Max. recommended operating temperature of the surface 80°C. Standard version with clipped edge. Flanged version available upon request.
- HSAD breeches pipes made of 2.0 mm mild steel SS1312. Straps.
- HSAE breeches pipes made of 3.0 mm mild steel SS1312. Straps.
Call for price -
Welded on pipe systems for obtaining clipped edge or flange end.
- RMAD 2.0 mm mild steel SS1312. Unpainted.
- RMAE 3.0 mm mild steel SS1312.
Call for price -
Priming and top coating RAL 7032, 50 microns, zinc content 70%. Max. recommended operating temperature of the surface 80°C.
- ROGD 2.0 mm mild steel SS1312. Clipped.
- ROGD 3.00 mm mild steel SS1312. Clipped
- ROGD 2.0 mm mild steel provided with flange.
- ROGE 3.0 mm mild steel provided with flange.
Call for price -
Steel quality SS1312.
- Clipped edge.
- Base and top coat in RAL 7032 grey, 50 microns.
- Max. working temperature of the surface treatment is 80°C.
- For assembly of duct and fittings with clipped edge, use FSFE or FSDB clips.
- For diameters up to 600 mm.
- Order example: RSAD-300-20.
Call for price -
- Steel quality SS1312.
- Flanged, with fixed flanges, type FSSA.
- Base and top coat in RAL 7032 grey, 50 microns.
- Max. working temperature of the surface treatment is 80°C.
- For assembly of duct and fittings with flanges, use bolt, nut and flange gasket FSAZ.
Call for price -
Priming and top coating RAL 7032, 50 microns, zinc content 70%. Max recommended operating temperature for the surface treatment is 80°C.
- End cap is made RBFD in 2.0 mm mild steel SS1312. Clipped.
- End cap is made RBFD in 2.0 mm mild steel SS1312. Flange.
Call for price -
- Steel quality SS1312.
- Strap edge.
- Base and top coat in RAL 7032 grey, 50 microns.
- Max. working temperature of the surface treatment is 80°C.
- For assembly of duct and fittings with clipped edge, use FSFE or FSDB clips.
- The dimensions Ø 100-300 is pressed execution then segments built.
- R (radius) = 1.5 x d (diameter).
- Order Example: BSAD-450-90.
Call for price
